Zero / Tare Function - Kalorik EKS 42441 Manual De Instrucciones

Fax +1 305 430 9692
WEIGHING
1) Switch scale on using the "On/Zero" switch situated on the acrylic
platform. The LCD screen will initialize.
2) The scale will turn on and the LCD display will show "0 g" or "00:0.0
lb:oz." . Change the weight unit as needed, by pressing the "Unit"
touch button.
3) Put the object you want to weigh on the acrylic plate. The stabilized
weight is displayed.
4) Remove the object from the platform.
5) The scale turns off automatically after 45 seconds. You can also
switch the scale off anytime by keeping pressing on the "On/zero"
button.
6) If scale goes off automatically, press on the ON/ZERO touchpad to
switch on again.

ZERO / TARE FUNCTION

The zero/tare function is extremely useful to calculate the weight of
ingredients that cannot be put directly on the platform. For example flour,
or liquids, which require a container before weighing.
Condition 1: Zero function (when the load on scale is less than 0.2kg / 0.44
lb)
In order to use this function, place the empty container on the scale, and
then press the "On/Zero" touch button near the LCD display. The scale will
switch on and indicate 0g or 00:0.0 lb:oz. Add the ingredient to weigh. The
weight indicated on the display is the weight of the ingredient added inside
the container!
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
5
Assembly page 5/24
special instruction from Team
Print only
EKS 42441/42442/42443 - 120501