Belkin F5C412eb140W Manual Del Usuario página 8

CAUTION:
Applicable only for the :
F5C412uk300w & F5C412eb300W models
FOR USE WITH CIGARETTE LIGHTER PLUG:
WARNING: If more than 150 Watts of AC power are required from the
Inverter, DO NOT connect the Inverter through the vehicle's cigarette
lighter socket. THIS WILL OVERHEAT THE WIRES AND COULD CAUSE A
FIRE. When using the devices that require a TOTAL of 150 Watts or more,
connect the Inverter directly to the vehicle's battery terminals using the
provided Battery Clip.
1. Insert Inverter's Cigarette Lighter Plug into vehicle's cigarette lighter
socket.
Note: Make sure Inverter is not ON when starting vehicle. If ON, a voltage
surge from the vehicle could damage the Inverter or device lugged into it.
2. Turn Inverter "ON" (Switch is located at front of unit, next to 220V electri-
cal sockets). If the LED Status Light on Inverter illuminates GREEN, then
the unit is functioning properly. If the LED Status Light on the Inverter
illuminates RED, turn unit off immediately and check all connections.
3. Plug device(s) (rated lower than 150W) into one of the 220V electrical
sockets. Switch appliance(s) ON to begin operation. As long as LED
Status Light on front panel of Inverter is GREEN, the device may
be operated as normal.