A.
B.
C.
CONTROL PANEL
1. Overheat (red)
5. Reverse
2. Remove Paper (red)
6. On/Off (blue)
3. Bin Full (red)
7. Start
4. Bin Open (red)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Operation, maintenance, and service requirements are covered in the instruction
manual. Read the entire instruction manual before operating shredders.
• Keep away from children and pets. Keep hands away from paper entry. Always set
to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder
openings. If object enters top opening, switch to Reverse (
15
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
15
• Avoid touching exposed cutting blades under shredder lid.
15
• Unplug shredder before cleaning or servicing.
2
D.
E.
F.
G.
1.
2.
3.
4.
• Do not use if damaged or defective. Do not disassemble shredder.
Do not place near or over heat source or water.
• This shredder has a Disconnect Power Switch (D) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
) to back out object.
• Shredder must be plugged into a properly grounded wall outlet or socket of the
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
KEY FEATURES AND CONTROLS
A. Shredder Lid
E. See Safety Instructions
B. Manual Feed Slot
F. Control Panel (see below)
C. Casters (200C only)
G. Pull-Out Bin
D. Disconnect Power Switch
1. OFF
2. ON
5.
ENGLISH
Model 200C/130C
6.
7.