Pleasant Hearth SPK100 Manual Del Usario página 9

INSTALLATION
This safety pilot system must be installed by a qualified
profession service technician.
Note: Installation is easier when done outside of the
fireplace.
Save the orifices removed from the appliance for future
use.
Liquid Propane Conversion Safety Pilot Kit
Assembly Instructions
1. Determine which side of the burner assembly the
control will be on – Left or Right and attach ON OFF
Label to Valve Bracket.
-This assembly illustration shows the control on the
right side.
2. Attach Piezo Ignitor to Valve Bracket.
3. Attach Valve to Valve Bracket.
4. Install Knob to Valve.
5. Attach Nozzle to Burner Pan.
WARNING: Failure to position the
parts in accordance with these
diagrams or failure to use only parts
specifically approved with this appli-
ance may result in property damage
or personal injury.
Install Knob
8
Pilot Assembly
Pilot Bracket
Burner Pan
Nozzel
Remove screws in Burner Pan
and use these to install
Pilot Bracket