Chauvet Professional VIP Manual Del Usario página 6

VIP™ Signal Distributor QRG
Distributor
Connection to
the Video Wall
Mounting
Product
Mounting
Diagram
When using the VIP™ Signal Distributor, connect your source to the VIP™
Driver. The VIP™ Driver is then connected to the VIP™ Signal Distributor,
which is then connected to the first series of 24 panels. You have
eight (8) signal outputs, each one can be connected to a set of 24 panels.
Refer to the following diagram.
Up to 24 Panels
Up to 24 Panels
Before mounting this product, read the Safety Notes at the beginning of this
guide. The VIP™ Signal Distributor can be rack-mounted using the mounting
ears on either side of the front panel. You can easily rack mount the
VIP™ Signal Distributor with the other VIP™ hardware components you are
using, if applicable, (i.e., VIP™ 5162 Signal Processor, VIP™ Driver, and
VIP™ Media Server) for easy setup and connection.
Mounting Ears
6
EN
VIP™ Media
Server
DVI or HDMI
VIP™ Driver
etherCON®
(up to 100 m)
VIP™ Signal
Distributor