Dynex DX-CDRW52 Guia Del Usuario página 9

DX-CDRW52.fm Page 9 Friday, April 1, 2005 4:16 PM
Features
7 Locate your computer's power supply and find an unused power cable con-
nector. If you do not have an available power connector, you must buy a
Y-power cable splitter that expands one power connector into two. You can
buy a power cable splitter from a computer store.
8 Plug an IDE cable into the 40-pin Secondary IDE connector on your system
board, then connect the cable to your CD-R/RW drive. Attach the audio
cable if necessary. If you had another CD drive with audio cable attached, it
is not necessary to attach the audio cable to your CD-R/RW drive.
Sound card
System board
9