Publicidad
English
Technical Information
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Hole size in mounting surface
spout
valve
handshower
Max. depth of mounting surface
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
This unit includes a cutout template, which
must be used. Custom installations may
require additonal parts which cannot be
furnished by Hansgrohe.
• This faucet requires ½" hot and cold supply lines
(not included).
• This unit must be completed with a trim kit. The
handshower must be installed.
• Protection against back siphonage is provided by
a check valve (included with the trim kit) and by an
automatically resetting diverter (included with the
trim kit).
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
1⅜" (35 mm)
2" (50 mm)
1⅜" (35 mm)
1⅝" (40 mm)
• To insure proper fit of the trim, the surface material
(tile, etc) must be installed prior to installation of this
rough.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F. In
Massachusetts, the maximum output temperature
can be no higher than 112° F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Publicidad
