Sanus FSF110 Manual Del Usuario página 11

4. Slide the cover to expose the mounting holes in wall plate assembly
5. Install wall plate assembly
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
6. Reattach the cover onto the wall plate assembly
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt
and shifting the wall plate until level. Tighten the bottom lag bolt when adjustments are complete.
4
Cover
13
using two lag bolts . Tighten the lag bolts only until they are pulled firmly against the wall plate.
14
13
13
.
5
13
.
13
14
Loosen
14
14
6
Cover
13
Tighten
11