H.Koenig HKM1032 Manual De Utilización página 5

or top switch is not well switched, LCD would display as (Figure 10). When SS jar is well placed and top
switch is well switched, LCD would display as (Figure 11). Time, temperature and speed can be adjusted
under this condition.
Note: For safety consideration, when cover is not well covered, top switch can not be switched to
the right place. Please do not switch it by force.
Figure 10
How to dismantle blade assembly (Figure 12 is blade assembly):
Left hand reaches into SS jar to hold the semicircle part on blade assembly (Figure 13), right hand turn
off the nut in anti-clockwise (Figure 14), then pull out the blade assembly by left hand.
Semicircle part on
blade assembly
Figure
﹗Caution: Stirring blade is very sharp. Please do not touch the edge directly when dismantling to avoid
any injury. Consumer should hold the upper part when remove or replace the blade assembly to avoid the
blade assembly fall off leading to accident.
How to assemble blade assembly: reverse the process of dismantle blade assembly.
Usage and how to use the accessories:
1. SS jar cover: To cover the jar. A sealed ring inside can avoid the food, soup or vapor spil ;When
assemble the seal ring "ESTA CARA A LA TAPA↑,FACE UP ↑"the warning words should be faced to
consumer see below Figure 15,Otherwise, the liquid would be spilled.(Figure 16)
Figure 11
Loosen the nut
13
Figure 12
Figure 14
Blade assembly
Nut