Dryer Description; The Front; The Back; Control Panel - Indesit ISL60V Manual De Instrucciones

Dryer Description

The front

GB

Control Panel

Model & Serial
numbers
Control panel
Programme Guide
The START/CANCEL button
programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. If you have not set a programme, the buzzer
will beep four times. When a programme is running,
holding this button cancels the programme and stops
the dryer (see Start and Programmes).
The OPTION buttons/lights select available options for
your selected programme (see Start and
Programmes). The lights indicate that the option has
been selected.
The Programme Guide allows you to consult a user
friendly table of the available programmes.
The Clean Filter light
every programme that it is essential to clean the filter
every time the dryer is used (see Maintenance and Care).
4
Drum
Filter
Progress or Delay
Lights
Buttons and Lights
starts a selected
gives you a reminder before

The back

Air Intake Vent
Rating plate
Clean Filter
Light
On/Off
Options
START/CANCEL
Button
The On/Off indicator light
is in use or ready to select a programme. If this light
flashes it indicates a fault (see Troubleshooting).
The ON/OFF button
this button is pressed, the dryer stops. Press again,
the dryer restarts.
The Progress or Delay lights show you the status of
the programme or the delay time when they flash.
During a delayed start the lights flash to show the
delay selected. When (not flashing) they show each
stage of the programme by the corresponding light
turning on (see Start and Programmes).
The PROGRAMMES knob sets the programme: rotate
it until the indicator is pointing to the programme you want
to select (see Start and Programmes).
Caution: Hot!
Vent Tube
fitted here
ON/OFF
Button
PROGRAMMES
Light
Knob
Indicator
signals that your dryer
: If the dryer is running and