Here are the individual parts of
your Astro-Planetarium (Fig. 1-3)
1 Planetarium sphere
2 On / Off switch
3 Button for opening the slide
drawer (works like the DVD
drawer in a DVD player)
4 Control for setting the sleep
mode (30 or 60 minutes)
5 Knob for setting the date
6 Time frame
7 Objective lens
8 Focus knob
9 Pedestal for the
planetarium sphere
10 Slide plates
11 Battery compartment cover
12 Batteriefachabdeckung
13 Battery holder with screw
14 Battery compartment
15 Batteries
16 Accompanying booklet
Reader on the 12 zodiac signs
17 CD-ROM for your PC: Astronomy
Software "Cartes du Ciel"
20
You assemble the telescope as
follows:
Open the battery compartment cover
1@
on the underside of the planetari-
b
um sphere
(Fig. 3).
D
Loosen the screw on the battery
1#
holder
with a screwdriver (you've
surely got one at home).
Now lay the 3 batteries
1$
battery compartment
as shown in
fi gure 3.
IMPORTANT: Be sure to place the
batteries in so that their positive and
negative poles are in the right direc-
tion. The little imprints (+/-) in the bat-
tery compartment will tell you which
direction is right.
After you've installed the batteries
1%
, put the battery holder
and screw it in.
Finally, you must only set the battery
compartment cover
1%
into the
1#
back on
1@
on again.