NOTICE:
• Riding in the following will make oil quality become inferior and please change it earlier.
1) Always ride on gravel road.
2) Ride for a long distance.
3) Ride at the area with wet weather.
C.REPLENISHMENT OF BRAKE OIL: (DISK BRAKE)
• Turning the bike handle until the brake oil level in storage tank become horizontal.
• Remove the tank cover and seal.
• Replenish the specific brake oil up to the above of the mark "LOWER" ,then screw up the cover screws.
Brake oil: DOT-3.
• Assemble the sea), tank cover and upper handle cover.
D. SPARK PLUG INSPECTION:
NOTICE:
• Use only the specific brake oil. Otherwise, the rubber seal will be distorted and lead to oil leakage. The function will not work.
• Do not mix both specific and non-specific oils together, otherwise, it will cause a chemical reaction and lead to brake failure.
• Do not let the water penetrate into the main cylinder, otherwise, the boiling point will be lowered and lead to be choked.
• The painting surface and plastic parts will be corroded by the brake oil. In case of spilt, please be sure to clean promptly.
• Please find out the problem with our distributor or service center if the standard level of brake oil is not able to reached.
28