Proper Disposal Of Your Old Beverage Center; Installation Requirements; Tools And Parts; Location Requirements - KitchenAid KUBR314KSS Guía De Uso Y Cuidados E Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Proper Disposal of your Old Beverage
Center
WARNING:
Risk of child entrapment. Before you
throw away your old Beverage Center:
Take off the door.
Leave the shelves in place so that children may not easily
climb inside.
Suffocation Hazard
Remove doors or lid from your old appliance.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and
suffocation are not problems of the past.
Junked or abandoned beverage centers
are still dangerous – even if they will sit for
"just a few days." If you are getting rid of
your old beverage centers, please follow
these instructions to help prevent
accidents.
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and
Local regulations. Refrigerants must be evacuated by a
licensed, EPA certified refrigerant technician in
accordance with established procedures.
INSTALLATION
REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting
installation.
Tools and parts needed:
Phillips screwdriver.
Custom Overlay Door Panel - Refer "Custom Overlay
Panel Preparation".
Custom handle and mounting hardware (optional).
Parts supplied:
M4 x 30 flathead screws (8).

Location Requirements

Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from beverage center.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: This appliance is intended to be used in
household and similar applications such as:
Staff kitchen areas in shops, offi ce and other working
environments;
Farm houses and by clients in hotels, motels and other
residential type environments;
Bed and breakfast type environments;
Catering and similar non-retail applications.
NOTES:
For the beverage center to be fl ush with the front of the base
cabinets, remove any baseboards or moldings from the rear
of the opening. See "Product Dimensions" and later in this
section, "Opening Dimensions".
It is recommended that you do not install the beverage center
near an oven, radiator, or other heat source.
Do not install in a location where the temperature will fall
below 55 °F (13 °C). For best performance, do not install the
beverage center behind a cabinet door or block the base grille.
Opening dimensions:
Height dimensions are shown with the leveling legs extended
to the minimum height.
NOTE: When leveling legs are fully extended, add 5/8"
(15 mm) to the height dimensions. See "Product Dimensions."
If the fl oor of the opening is not level with the kitchen
fl oor, shim the opening to make it level with the kitchen fl oor.
C
B
G
I
F
Recessed
G
receptacle
locations
E
H
F
Utility
D
opening
A
3

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Kubl314kssKubl314kbsKubr314 kbsKubl214ksbKubr214kpaKubr214ksb

Tabla de contenido