Installation Steps - DEFLECTA-SHIELD TrailBack Running Board Instrucciones De Instalación

Installation Steps

Locate cross members behind the wheel wells
for bracket locations.
1
FRONT
Driver side
2
Assemble front and rear brackets loosely. Attach supports using 5/16 flange bolts and nuts. Three (3) per assembly.
Wheel Well
Cross Member
Rear Bracket
Align the bracket along the top edge of
the cross member, making sure it nests
within the "v-shaped" groove. Mark hole
3 locations on cross member and drill 7/32"
holes.
Passenger side
Passenger side
Cross Member
x2
"V-Shaped" groove
Align the edge of the
bracket flush with
the edge of the cross
member. Mark hole location on
cross member and drill 11/32" hole.
Page 2 of 6
REAR
Driver side
Cross Member
x2
Front Bracket
10439
Rev A