Jung FM 5232 Serie Instrucciones De Servicio página 5

eNet
Tecla persiana con receptor vía radio
Settings, channel
Parameters
Manual commissioning
Operating mode
Local Operation
Transmission of blind/shutter
position > 10%
Behaviour on voltage return
Configured venetian blind po­
sition
Configured slat position
Behaviour after the end of the
disabling function
32582603
J:0082582603
Setting options, Basic set­
ting
On, Off
Basic setting: On
Roller shutter
Venetian blind
Awning
Basic setting: Roller shutter
On, Off
Basic setting: On
On, Off
Basic setting: Off
No change
Configured value
Basic setting: No change
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
no change
Last value
Down
up
Basic setting: No change
5/8
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can­
not be reset to the factory set­
ting.
Roller shutter
A rolling shutter or an awning
is controlled for which the Fa­
bric stretching function is re­
quired.
Venetian blind
A Venetian blind is controlled.
Awning
An awning is controlled for
which the Fabric stretching
function is required.
Blocks the output for operation
using the button.
The current position of the
blind/shutter is always trans­
mitted when the blind/shutter
comes to a stop. This parame­
ter makes it possible to specify
that, during travel, the position
is saved when the blind/shut­
ter position changes by more
than 10%. The saved value
can then be polled from the
eNet server.
Defines the behaviour of the
output after voltage return.
RMD design: Bus voltage re­
turn
If the value "Configured posi­
tion" is entered for the para­
meter "Behaviour after voltage
return", then the blind/shutter
position set here is approa­
ched.
If the value "Configured posi­
tion" is entered for the para­
meter "Behaviour after voltage
return", then the slat position
set here is approached.
Behaviour of the output when
a block is removed.
13.03.2014