About This Document; Electromagnetic Compatibility (Emc) - Axis PoE MIDSPAN 8-Port Manual Del Usuario

About this Document

This manual includes instructions for using and
managing the AXIS PoE MIDSPAN 8-Port/ AXIS PoE
Midspan 16-Port on your network. Later versions of
this document will be posted to the Axis Website.
Safety Notices Used In This
Manual
Caution! - Indicates a potential hazard that can
damage the product.
Important! - Indicates a hazard that can seriously
impair operation.
Do not proceed beyond any of the above notices until
you have fully understood the implications.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at http://www.axis.com/patent.htm
and one or more additional patents or pending patent
applications in the US and other countries.
Electromagnetic Compatibility
(EMC)
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment to an outlet on a different
circuit to the receiver.
Consult your dealer or an experienced radio/TV
technician for help.
Shielded (STP) network cables must be used with this
unit to ensure compliance with EMC standards.
USA.
This equipment has been tested and found to
comply with the limits for a Class B computing device
pursuant to Subpart B of Part 15 of FCC rules, which are
designed to provide reasonable protection against such
interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely
to cause interference, in which case the user at his/her
own expense will be required to take measures required
to correct the interference.
Canada.
This Class B digital apparatus complies with
Canadian ICES-003.
Europe.
This digital equipment fulfills the
requirements for radiated emission according to limit B
of EN55022/1998, and the requirements for immunity
according to EN55024/1998 residential, commercial, and
light industry.
Japan.
This is a class B product based on the standard
of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is
used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install and
use the equipment according to the instruction manual.
Australia.
This electronic device meets the
requirements of the Radio communications
(Electromagnetic Compatibility) Standard AS/NZS
CISPR22:2002.
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no
user-serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable
regulatory certifications and approvals.
Every care has been taken in the preparation of this
manual. Please inform your local Axis office of any
inaccuracy or omission. Axis Communications AB
cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior notice.
Axis Communications AB makes no warranty of any
kind with regard to the material contained within this
document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular
purpose. Axis Communications AB shall not be liable nor
responsible for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
Support
Should you require any technical assistance, please
contact your Axis reseller. If your questions cannot be
answered immediately, the reseller will forward your