Safety Warnings For Routers; Parts - Truper ROU-N3 Manual Del Usuario

Safety warnings for
WARNING
• Install only bits with the right size into
the chuck.
CAUTION
• Do not try to start the router when the
bit is making contact with the work piece.
• Allow the router to reach the desired speed before
starting the job.
CAUTION
• Do not force the router to cut the work
piece too fast.
• Make several passes with the router with progressive
depths when the job requires removing a lot of material or
when using bits with a large diameter.
Fine depth
adjustment
knob
Anti-slip grips
Dust extraction
connector
Base
Power cord
Power
cord
Switch
Continuous
use button
Chuck. Two included: one 1/4"
routers

Parts

Carbon
housing cap
Axis 8 stop gradual
lock tower
protector
Fastening
and other 1/2"
CAUTION
removing any cut or stuck material around the bit area.
WARNING
installing bits, parallel guide or dust extractor adapter,
disconnect the tool from the power source.
CAUTION
the respective handles to gain an optimum control.
Speed
regulator
Graded
depth stop
Depth stop
adjust knob
Safety bolt for
depth stop
Orifices to insert
the parallel
guide rods
Fine depth
adjustment
knob
lever
Safety
bolts
Parallel guide
safety bolts
• Allow the bit to stop completely before
• Before maintenance, removing or
• Hold the tool with both hands and by
8 stop
gradual
tower
Parallel
guide rods
Parallel
guide
ENGLISH
Switch
Copying
guide
(ROU-N3)
Copying
guide
(ROU-NX2)
Spanner
5