IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK).
Página 3
Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell.
Three (3) Years **6 months if used in auto scan/tour operation During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Manufacturer at Moog, Decatur Operations, 2525 Park Central Boulevard, Decatur, Georgia, 30092. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip.
Content of Box Electrical Specifications LDW75CLG 120/240 VAC 50/60Hrz. 96 Watts Accessories: Heater: 50 Watts, Blower: 2 Watt Camera Power: (See Camera Specifications): 40 Watts Max English 120/240VAC 50/60Hrz. 96 Vatios De Accesorios: Calentador: 50 Watts, Blower: 2 Vatio Energía De la Cámara fotográfica De : (Véase Las Especificaciones De la Cámara fotográfica): 40 Vatios...
Página 6
Power Feed Locations: LIQUID TIGHT PLUG FOR 3G ANTENNA BULKHEAD CONNECTOR HOLE. LIQUID TIGHT PLUG FOR OPTIONAL MAIN POWER HOLE. LIQUID TIGHT PLUG FOR OPTIONAL MAIN POWER HOLE. LIQUID TIGHT STRAIN RELIEF FOR MAIN POWER HOLE.
Página 7
• Usi le cinghie d'acciaio per montare l'unità al palo. Use furos marcados para unir as cintas de aço. • L'unità di LDW75CLG è pronta a montare. Usi i profondi fori per attaccare le cinghie d'acciaio. Place the housing onto the bracket, secure by Attach pole mount clips to bracket as shown, using using the provided 2 (M10) bolts and washers.
WALL MOUNTING Tilt the unit to align the grooves (holes) to the Affix the wall mount bracket to the surface lips on the bracket. of the wall as shown. • Incline la unidad para alinear los surcos (agujeros) con • Ponga el soporte del montaje de la pared a la los labios en el soporte.
Página 9
To install a camera or for the maintenance of the Remove the dome and follow the specified unit (if needed) you should flip so that the dome is camera mounting options. facing upwards. • Quite la bóveda y siga las opciones especificadas del •...
Página 10
To open the top cover unlock the latches. Top inside view of the unit. From here you can activate the unit • Para abrir la cubierta superior abra los cierres. Aquí de • Tapa dentro de la vista de la unidad. usted puede activar la unidad.
Página 11
For use with the analog pan/tilt camera systems POWER Camera Power (24Vac) Camera Power (24Vac) Orange Accessory Power (24Vac) Yellow Accessory Power (24Vac) Green CONTROL RS-485RXA Blue RS-485RXB Violet RS-485TXA Gray RS-485TXB White 3G/4G Camera Prep Assign your camera the static TCP/IP address of Connect to your camera with a laptop or pc 192.168.1.50 with a subnet mask of 255.255.255.0 and a gateway of 192.168.1.1.
Página 12
USB 3G/4G Card Prep Change to HTTP port from the default port 80 to the port 12345. When ordering your service with your provider, have them add a static ip address to the service <extra • Cambie al puerto del HTTP del puerto 80 del defecto al puerto 12345. charge may be involved>...
Página 13
Advanced configuration options for changing the WiFI settings, etc. are available through the admin interface. Use the provided velcro to mount and secure the USB modem. On applicable models only. • Las opciones de configuración avanzadas para cambiar los ajustes de WiFI, el etc. están disponibles a través del interfaz del admin.
Replacement Parts LDW75CLG Liberty Series PART # DESCRIPTION 1 RP40VL3707 TOP COVER ASSEMBLY 2 RPLBHNG TOP COVER HINGES, LEFT&RIGHT 3 RP30VL3708 HINGE PLATE 4 RP96GK3710 TOP COVER GASKET 5 RP70VL3727 BOARD SHIELD 6 RP76VL2007 4G POWER & CONNECTION BOARD ASSEMBLY 7 RP96SJ355012 1/2"...