EVH® 212ST / EVH® 112ST Loudspeaker Enclosures
Your new EVH 212ST or EVH 112ST loudspeaker enclosure
delivers big, full tone with the EVH 5150 III 50W head or
other quality tube amplifier. Built to Edward Van Halen's
specifications, its features include:
• Premium 5/8" Birch Ply construction for resonant tone
• Celestion G12H 30W speakers for full bottom end and rich
highs
• Availible in Ivory or Black coverings
EVH 212ST Head Locking System
A special head-to-speaker cabinet locking system enables you
to use the EVH 212ST speaker cabinet in the tilt-back position
when coupled with the EVH 5150 III 50W head amplifier.
Loosen the two thumbscrews on the top of your EVH 212
speaker cabinet. Then, pull out the brackets on the bottom of
your EVH 5150 III 50W head and align the rear facing slots on
PART NUMBER:
DRIVERS:
CABINET:
SENSITIVITY:
POWER HANDLING:
IMPEDANCE:
CONNECTIONS:
DIMENSIONS:
WEIGHT:
4
Specifications
EVH® 212ST
2253101000 (Black)
2253101400 (Ivory)
Two 12" (30.5 cm)
0.63" (16 mm) Birch ply
99dB, 1 Watt- 1 Meter
50 Watts
16Ω
1/4" high current phone jack
Height: 20 in (50.8 cm)
(with castors)
Width: 30.1 in (76.5 cm)
Depth: 14.0 in (35.6 cm)
60 lb (27.2 kg)
Product specifications are subject to change without notice.
the brackets with the thumbscrews on the speaker cabinet.
Slide the head back so the brackets engage fully with the
thumbscrews. Tighten thumbscrews to ensure a secure and
vibration-free connection.
Speaker Connections
Use speaker cable (16-gauge minimum) with standard 1/4"
plugs to connect each EVH® enclosure to a 1/4" speaker output
jack on your amplifier.
∆ Caution: Only connect speakers that comply with your
amplifier's minimum impedance and maximum power output
specifications to prevent damage to your equipment.
∆ Caution:
EVH® amplifiers and loudspeaker systems are
capable of producing very high sound pressure levels which
may cause temporary or permanent hearing damage. Use
care when setting and adjusting volume levels during use.
EVH® 112ST
2253100000 (Black)
2253100400 (Ivory)
One 12" (30.5 cm)
0.63" (16 mm) Birch ply
96dB, 1 Watt- 1 Meter
25 Watts
16Ω
1/4" high current phone jack
Height: 16.5 in (42.0 cm)
Width: 20 in (50.8 cm)
Depth: 12.0 in (30.5 cm)
32 lb (14.6 kg)