To answer or end a call, press the
answer/end key. To reject a call, press
this key twice.
To adjust the volume, press either
volume key.
To mute or unmute the microphone,
press both volume keys at the same
time. When the microphone is muted,
the green indicator light flashes twice
about every 5 seconds.
To switch a call from the headset to a
compatible phone, press and hold the
answer/end key for about 2 seconds,
or switch off the headset. To switch
the call back to the headset, press and
hold the answer/end key for about
2 seconds, or switch on the headset.
Turn lights on or off
By default, the indicator lights are
shown in all situations. To turn the
lights off in some situations (for
example, during a call or when the
headset is connected to a phone) or
back on, press and hold the power key
and the answer/end key for about
5 seconds when the headset is
connected to a phone.
Clear settings or reset
To delete the pairings from the
headset when it is switched off, press
and hold the power key and the
answer/end key (for about 5 seconds)
until the red and green indicator lights
start to alternate.
To reset the headset if it stops
functioning, even though it is charged,
connect the headset to a charger
while you press and hold the
power key.
Troubleshooting
If you cannot connect the headset to
your compatible phone, check that the
headset is charged, switched on, and
paired with your phone.
ENGLISH