Troubleshooting; Technical Specifications - Verilux HappyLight Liberty 5K Manual De Instrucciones

Before requesting service on your Verilux lamp, please:
• Make sure all power connectors, cords and plugs are inserted fully and securely.
• Be sure the bulb is securely seated in the socket. (See page eight.)
• Make sure there is power to the wall outlet, or try another outlet – one that is not
connected to a dimmer.
PROBLEM
Light Won't
Come On
Blackening/Darkening
at Ends of Bulb
Light Flickers
HappyLight Liberty Series Natural Spectrum Energy Lamp
Environment
Operating Temperature: 10 to 30°C (50 to 86°F)
Storage Temperature: -20 to 50°C (-4 to 122°F)
Relative Humidity: 20 to 90% non-condensing
Bulb
Replacement bulb: 26-watt 10,000-hour bulb.
Replace with Verilux brand only, Model number CFS26GU24VLX by calling
1-800-454-4408 or visiting www.verilux.com.
Power
Input Power: 120 VAC, 60Hz, 0.50 A
ETL Listed in Canada and the USA

Troubleshooting

CHECK
Has the plug come Insert plug securely into wall outlet.
loose?
Is the bulb old?
Check bulb for blackening/darkening at bottom of spiral where it joins the
base (an indicator of bulb life) and replace bulb.
Is the bulb connected Be sure the bulb is securely seated in the socket. Repeat the bulb
securely into socket? installation process.
bulb replacement or installation.
Is the bulb new? Sometimes when a new bulb is turned on for the first time the tubing will
darken, but this will fade after a few minutes.
Is the bulb old? With older bulbs, darkening of the tubing indicates end of bulb life. (This
doesn't affect operation except to reduce the amount of light available,
since the phosphor in that area has become inactive.) Bulb replacement
is recommended.
Has the plug come Insert plug securely into wall outlet.
loose?
Is the bulb connected Be sure the bulb is securely seated into the socket. Repeat the bulb
installation process.
securely to the socket?
bulb replacement or installation.
Is the lamp connected Connect lamp plug only to wall outlet without dimmer switch.
to a dimmer switch?

Technical Specifications

SOLUTION
Always unplug lamp before performing
WARNING:
Always unplug lamp before performing
WARNING:
11