Cleaning The Dust Cup; Replacing The Hepa Media Filter - Riccar R60 El Manual Del Propietario

CLEANING THE DUST CUP

1 . Push the dust cup latch to remove the
dust cup from the vacuum (Fig . 1) .
2 . Remove the floor nozzle from the dust
cup by pressing the red button on
the nozzle neck and pulling the floor
nozzle out of the dust cup (Fig . 2) .
3 . Remove the cyclonic filter holder
(Fig . 3) .
4 . Shake out remaining dust and rinse
with water . Make sure all pieces are
completely dry before replacing in
the vacuum .
5 . Replace the cyclonic filter holder .
6 . Replace the dust cup onto the vacuum
(Fig . 4) . Then replace the floor nozzle
and resume vacuuming (Fig . 5) .

REPLACING THE HEPA MEDIA FILTER

WARNING: Always unplug the vacuum from the electrical
outlet before removing the filters .
1 . Remove the filter cover by pushing in on the tab and
rotating the cover out (Fig . 1) .
2 . Remove the filter by grasping the filter and pulling the
filter straight out of the machine (Fig . 2) .
3 . Replace with a new filter (do not wash and reuse) .
4 . Replace the filter cover by inserting the two tabs in first
then snapping the cover in place with the large tab .
Fig . 1
Fig . 3
10
Fig . 2
Fig . 4
Fig . 5
Fig . 1
Fig . 2