Mpaa Rating Set Up; Change Access Code; Menu Language - Insignia IS-TV040921 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

B

MPAA RATING SET UP

Follow steps 1 to 3 in the "V-CHIP SET UP" sec-
tion on page 16.
4
Select your desired item
Press [K / L] to point to your
desired item, then press [ENTER]
to select [BLOCK] or [VIEW].
Selection
Rating Category Explanations
G
General Audience
PG
Parental Guidance suggested.
PG-13
Unsuitable for children under 13
R
Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17
No one under 17 admitted
X
Mature audience only
When you select a rating and set it to [BLOCK],
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
When you set the lowest rating to [VIEW], all
other ratings will automatically be available for
viewing.
5
Exit the V-Chip setting mode
Press [SETUP] to exit the menu.
C

CHANGE ACCESS CODE

Follow steps 1 to 3 in the "V-CHIP SET UP" sec-
tion on page 16.
4
Enter New code
Press the Number buttons to enter
your desired access code in the
"NEW CODE" space, then enter
the same code in the "CONFIRM
CODE" space. When completed, the menu will
return to "V-CHIP SET UP".
Make sure you enter exactly the same new code in
the "CONFIRM CODE" space as one in the
"NEW CODE" space. If they are different, the
"NEW CODE" space is cleared for redoing.
5
Exit the V-Chip setting mode
Press [SETUP] to exit the menu.
NOTE:
Your personal access code will be erased and will
return to the default (0000) when a power failure
occurs or when you turn off the power using a
wall switch. If you have forgotten the code, unplug
the power cord for 10 seconds to restore the access
code to 0000.
1
Press [SETUP].
G
[VIEW]
PG
[VIEW]
Press [K / L] to point to "LAN-
PG–13
[VIEW]
B R
[BLOCK]
NC–17
[BLOCK]
GUAGE".
X
[BLOCK]
2
Press [ENTER] repeatedly to select "ENGLISH",
"ESPAÑOL"= Spanish or "FRANÇAIS"= French.
3
Press [SETUP] to exit the menu.
NOTES:
This function effects only the language on the
screen menu and not the audio source.
If for some reason the menu is in Spanish or
French, press [SETUP], press [K / L] to point to
"IDIOMA [ESPAÑOL]" or "LANGAGE
[FRANÇAIS]", then press [ENTER] repeatedly to
select desired language, then press [SETUP].
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _
- 17 -

MENU LANGUAGE

Select "LANGUAGE"
Select "ENGLISH", "ESPAÑOL" or "FRANÇAIS"
Exit the Language mode
TV
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido