Klugmann KO609TCPBX Manual De Instrucciones página 16

•
To change the time, touch the
bols together until the indicated time flashes
on the display. Change the time by pressing
the or – sensors. Two beeps will then con-
firm that the new time has been set.
NOTE
The clock light has a night mode so the display
light will dim between 00:00 and 6:00 hours.
Manual Operation
•
After setting the clock, the oven is ready for use.
Select a cooking function and temperature.
•
The
depending on the top and bottom cavity
functions.
•
During cooking, the
to indicate that heat is being transmitted to
the food.
•
This symbol disappears when the selected
temperature has been reached.
•
Set the controls to
Electronic Clock/Timer Settings
Timer Alarm: The alarm will go off at the pro-
grammed time, even if the oven is not in use.
Cooking Time (top and bottom cavity): This
function allows you to programme the cooking
time, after which the oven will turn off auto-
matically.
Cooking Stop Time (top cavity only): This
setting allows you to programme the time for
cooking to stop, after which the oven will turn
off automatically.
16
and – sym-
symbols will light up
symbol will light up
to turn off the oven.
Cooking Time and Cooking Stop Time (top
cavity only): This setting allows you to pro-
gramme the cooking time and cooking stop
time. The oven switches on automatically at the
set time and operates for the selected cooking
time (Cooking Time). It then switches off auto-
matically at the indicated time (Cooking Stop
Time).
Programming the Timer Alarm
1. Touch the
until the symbol starts flashing on the
display. The clock will also flash 00:00.
2. Select the time after which you want the
alarm to sound by pressing the
sensor.
3. You will hear 2 beeps to confirm that the time
has been set. The clock will start counting
down from the selected time and the
symbol will flash slowly.
4. When the time is up, the alarm will go off and
the symbol will flash quickly.
5. Touch any sensor to stop the alarm. The
symbol will then disappear.
If you want to change the timer alarm, simply
touch the sensor with your fingertip and
then press the
beeps to confirm that the time has been chan-
ged. The clock will then start counting down
from the new time and the
flash slowly.
NOTE
You cannot see the current time on the display
when the timer alarm is set.
sensor with your fingertip
or – sensor. You will hear 2
symbol will
or –