Italiana Camini MAREA Instalación Uso Y Mantenimiento página 19

ASSEMBLY OF THE MAREA STOVE COVE-
MAREA STOVE COVERING STEEL
RING STEEL
• Remove the upper 2 screws from the rear panel.
• Detach the top (which is only pressed into place) from the
stove.
• Insert the left and right metal side panels from the top, sli-
ding them downwards, into the aluminium profiles.
• Fasten piece no. 72 into place with the three screws corre-
sponding to the 2 central slots and the rear slot.
• Put the top back into place and tighten the 2 upper screws
back into the rear panel.
ASSEMBLY OF THE MAREA STOVE
MAREA STOVE COVERING SOAPSTONE
COVERING SOAPSTONE
• Remove the upper 2 screws from the rear panel (49), detach
the top (12) which is only pressed into place.
• And insert the 6 ceramic tiles (78), paying utmost attention
so as not to damage them, into the appropriate aluminium
profiles (13).
• Press the top (12) back into place and use the 2 screws to
fasten it to the rear panel (49).
• Place the base (2) under the stove.
- 19
-