Dell PowerEdge 2420 Guia De Instalacion página 17

4 Reverse the bottom hinge body.
Remove the Allen bolts that secure the hinge body to the rack,
a
and place the bolts in a safe location.
Rotate the hinge body 180 degrees so that the hinge posts are now
b
on the right side of the hinge body (see Figure 1-6).
Locate the bottom bolt holes in the right side of the rack, and use
c
the Allen bolts to fasten the hinge body to the right side of the rack.
5 Rotate the front door 180 degrees so that its hinge-pin housings are
on the right side (see Figure 1-7).
Figure 1-7. Rotate Front Door
6 Rehang the front door by reversing the steps in "Removing the Front Door"
on page 8."
Installation Guide
15