Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
●
After cleaning the water supply filter, securely tighten the water filter drain valve.
(A loose installation may cause water leakage.)
●
Carry out installation properly in accordance with this installation guide.
(Improper installation may cause water leakage, electric shock or fire.)
Required
●
Push the Washlet securely into the base plate.
(Push the Washlet until a click sound is heard and then pull it slightly toward you to make sure
that the Washlet does not come off.)
(Otherwise, the Washlet may dislodge and fall whereby causing injury.)
●
Do not remove the water filter drain valve while the water shutoff valve is open.
(Otherwise, water may splash.)
●
Do not bend or crush the water supply hose.
(Otherwise, water leakage may occur.)
Prohibited
●
Do not lift the product by the toilet seat or toilet lid.
(Otherwise, the main unit may dislodge, fall and cause injury.)
Precautions before installation
1 . Turn on the electrical and water supplies to the product only after all other installation work is
complete .
2. Mount the base plate onto the toilet bowl and attach the Washlet to the base plate before turning on the
electricity. Otherwise, the water tank my be heat while empty and damage the product.
3. The required power supply and rated power consumption of this product are 120V AC (60Hz) and 313W.
Make sure your electrical outlet can support these requirements.
4. The power cord length is about 3.9ft (1.2m). Check to see if your electrical outlet is located within the reach of
the power cord.
5 . The water supply pressure must be within a range of 7psi (dynamic) to 110psi (static) (0 .05MPa to
0 .75MPa) . Make sure your water supply is within that range .
6. The water supply temperature must be within a range of 32º to 95ºF (0 to 35℃). Make sure your water supply
is within that range.
7. Do not use water supply hoses or junction valves other than those provided with the product.
*Since a water flow test is conducted on each product at the factory, water may have remained inside the product.
This water does not indicate a problem with the product.
US
3
Publicidad
Tabla de contenido
