Using The Product; Video Mode - nedis DCAM15BK Guia De Inicio Rapido

4
Place the product just behind or below the rearview mirror.
2. Place suction fix A
3. Use the suction fix clip A
4. Insert a microSD card (not included) into the microSD card slot A
5. Adjust the position of the lens A
4
Ensure the product and the power cable are installed and do not interfere
with the sight of the driver or impede with the operation of any driving
controls.
4
Always focus your attention on the road.
Connecting the product to the power supply
Option 1:
1. Plug the auxiliary power plug A
2. Plug the other end of A
Option 2:
1. Charge the product using the USB port A
4
While charging a green LED lights up, when fully charged the light is off.
4
The product automatically switches on and starts recording when you switch
on your car engine.
4
The camera switches off 5 seconds after the engine is off.

Using the product

Menu
1. Press menu A
5
2. Press A or A
w
3. Press OK A
6
4. Press A
to exit the menu.
r
Press A
to toggle between video mode, photo mode and playback mode.

Video mode

r
1. Press A
to enter the video mode.
w
2. Press A
to start or stop recording.
4
The indicator LED will blink blue.
w
Press A
to switch off the LED.
4
The product automatically saves recordings on the SD card.
9
on the windshield.
8
to fix the product to the windshield.
u
into an auxiliary power outlet.
6
to enter the setup menu interface.
7
to navigate through the menu.
to confirm a selection.
4
for optimal view of the road.
u
into the mini USB port A
2
.
8
3
.
1
.