Carrier 33NTC-HS Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
NTC
NTC system configuration
Item
Value
11-
Unit's remote ID
A
1
2
3
...
7
12-
HVAC system
Ye
No
Configuration menu – Supplement
Item 4- - Item 5-:
The user desired temperature can be set through buttons
Temperature increase or decrease starts from the factory-set value
of 22C (72F).
Each time button
or
is pressed, temperature is increased or
decreased by ±0.5 degrees (or ±1F).
In this case the temperature range is between 20 C and 24C (68F
to 76F).
In any case, the user can increase this temperature range by
changing item 4 and 5 values.
Item 4 is the starting temperature and item 5 is the value to be
assigned each time button
There follow some examples according to the scale range required
(we suggest changing item 5 ONLY):
GB - 8
Description
Unit remote ID ALL
Unit remote ID 1
Unit remote ID 2
Unit remote ID 3
...
Unit remote ID 7
[Defaults: "A" All]
Some application needs to manage
just the power module, without any
other system linked
An HVAC system is present
An HVAC system is NOT present
[Default: "Ye": HVAC system is
present]
or
is pressed.
Displayed
YES
YES
In both Occupied or Unoccupied
mode:
The temperature icon will be
hidden. Light and Blind icons
will appear just if selected
Item 5 = 2C (4F)
Minimum temp. = 14C (56F) —> automatically set at 15C (59F)
or
.
Maximum temp. = 30C (88F)
Item 5 = 1.5C (3F)
Minimum temp. = 16C (60F)
Maximum temp. = 28C (84F)
Item 5 = 1C (2F)
Minimum temp. = 18C (64F)
Maximum temp. = 26C (80F)
The user can also set the value of item 4 so that no temperature
increase or decrease can change it when button
pressed. To do so, set the desired fixed temperature value in item 4
and set 0C (0F) in item 5.
Anyway, the desired maximum temperature value is 32C (90F).
AQUASMART
MAESTRO
Available
Available
Available
Available
or
is

Publicidad

Tabla de contenido
loading

Tabla de contenido