Technoline WT 496 Manual De Instrucciones página 14

RADIO CONTROLLED TIME SIGNAL RECEPTION
After your clock is powered up, it starts to receive radio controlled time
signal. The
Receiving Signal
Successful Reception
Failed Reception
Automatic reception and Manual Reception
Your clock starts automatic reception everyday at 1:00, 2:00, and 3:00. If it
fails to receive the radio controlled time time signal at 3:00, it will start
reception at 4:00. If it fails again, it will start reception at 5:00. If it fails
again, it will start automatic reception at 1:00 again in the next day.
Manual reception: press and hold
with a short beep tone. Press and hold
reception with a short beep tone.
During reception, all buttons do not function temporarily except the
button.
TO SET TIME ZONE, HOUR, MINUTE, 12/24 HR, CALENDAR,
SNOOZE
Press and hold SET/ ALM, "00" flash. Press
1.
time zone in hours.
from "-12" to "+12" hours. Default time zone is "00" (Germany) :-
00 = Germany (GMT +1 hour)
-01 = U.K. (GMT +0 hour)
01 = Finland (GMT +2 hours)
2. Press SET/ ALM once again, hour digits flash. Press
set hour. Press and hold
3. Press SET/ ALM once again, minute digits flash. Press
set minute. Press and hold
Press SET/ ALM once again, "24 Hr" flash, press
4.
Hr" or "24 Hr" time format. For 12Hr time format, "PM" will appear on
the left of time digits to indicate the afternoon time. There is no AM
icon flashes.
( icon flashing)
( icon becomes static)
( icon disappear)
, your clock will start manual reception
to stop radio controlled time
or to accelerate setting in fast speed.
or to accelerate setting in fast speed.
EN. 3
/ button to select
/ button to
/ button to
to select "12
/