Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
XP SBC HC 8390/00-1.2
Installation
Headphone battery
replacement
IMPORTANT
Use only rechargeable LR03/AAA
NiMH batteries (preferably Philips).
Do not use NiCd batteries or
alkaline batteries as these may damage
your FM wireless system!
1 Open the headphone's battery
compartment.
2 Take out the batteries and dispose of them
properly.
3 Insert new batteries. Only use LR03/AAA
NiMH batteries (preferably Philips).
4 Make sure the batteries are correctly
inserted as indicated by the engraved
symbols in the battery compartment.
5 Close the battery compartment.
IMPORTANT
Before using the FM headphone for the
first time, please ensure that the
batteries are fully charged for about
16 hours.This will guarantee a longer
operating lifetime of the batteries.
Connecting the FM transmitter to a
headphone output of an audio
source (figure 4)
1 Connect the 3.5mm stereo plug of the
stereo audio cable to the headphone
output of an audio source, such as TV, HiFi
or PC.
– In case your audio source has a 6.3mm
headphone output, use the supplied
3.5mm to 6.3 mm stereo adapter plug.
19-06-2001 12:37
2 Switch on your audio source and carefully
3 Switch on the headphone.You may hear a
4 To tune, turn the tuning knob until the
5 Adjust the volume to the desired level with
1 Switch on your audio source and carefully
2 Switch on the headphone.You may hear a
3 To tune, turn the tuning knob until the
4 Adjust the volume to the desired level with
Pagina 7

Audio Connections

increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
signal is at its clearest and the tuning
indicator will light up.
the headphone volume control.
Basic operation
When the FM transmitter is connected to a
headphone output of an audio source.
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
signal is at its clearest and the tuning
indicator will light up.
the headphone volume control.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido