Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Determine The Need For An Adapter
If there are threads on the outside of the faucet – Proceed to Step 3.
If there are threads on the inside of the faucet:
Select the adapter and washer that fit your faucet. Place the washer into the
recessed end of the adapter. Apply plumbing tape (provided) to the threads on
both ends of the adapter. The tape acts as an extra seal and strengthens the
connection. Screw the adapter into the faucet. Hand tighten. A coin may be
inserted into the notch in the bottom of the adapter to help tighten it by an
additional 1/2 turn.
Plumbing Tape
NOTE: Washers are different thicknesses - use the washer that best fits your faucet.
2
Step
Adapter
Washer
4
V.2.1.0207 - 032107
Publicidad
Tabla de contenido
