Operating An Automatic Garage Door Control System - DAITEM SC900AX Guía De Utilización

9. Operating an automatic garage door control system

This function requires one or several relay output receivers to be connected.
The key can operate up to four different automatic garage door control systems.
Activate the handset
1. Pick up the handset (if it is
on the base), open the flip
cover and quickly press
.
2. If you have several
garages,
select the garage to be
opened using the keys
then
3. If you only have one
garage,
the opening command will
be sent directly to it.
3. The garage is activated
within 5 seconds.
IMPORTANT: if the
• 2 automatic garage door control systems, the
handset displays:
if both garages are closed,
if both garages are open,
if garage 1 is open and 2 is closed,
if garage 2 is open and 1 is closed.
(1) If a position contact is connected to the output receiver.
(2) The name of the automatic garage door control system can be customised (see Modifying handset operating options).
Status display
on the handset (1)
.
key operates:
Garage door system status
Closed
C
Closed
(2)
C
Opening command sent
C
Open
C
• more than 2 automatic garage door control
systems, the handset displays:
if all the garages are closed,
if all the garages are open,
if at least one garage is open.
127
GB