Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ADULT INSTALLATION REQUIRED.
TOOLS REQUIRED:
Level (A)
Measuring tape (B)
Power drill with 3/16", 1/2" and 1/8" masonry bit (C)
Power screwdriver with bull nose phillips bit (D)
Truss head spanner bit (E)
•
READ ALL INSTRUCTIONS BEFORE ASSEMBLY OF DIAPER CHANGING STATION.
•
Unpack carton and identify all parts.
•
This changer has six (6) recess mounting holes.
•
The diaper changing station is no stronger than the anchors or walls to which they are attached and, therefore,
MUST be firmly secured in order to support the weight they are intended to support. Contact an architect or building
contractor if any questions.
•
A stud MUST be located and used for at least one side of the diaper changing station.
Parts Description
Hardware for installation:
3" x 1/4" Wood Screws
3/4" Finishing Washers
3" x 1/4" Machine Screws
3/4" Flat Washers
Toggle Anchors
Door / Wall Plate
3" x 1/4" Wood Screws
Toggle Anchors
21-3/8"
542 mm
INSTALLATION INSTRUCTIONS
PARTS LIST
For Wood Studs:
3/4" Finishing Washers
A.D.A. Compliance:
34-3/4" (883 mm)
(Door)
A
WARNING
3/4" Flat Washers
3" x 1/4" Machine Screws
306.3 Knee Clearance
307.2 Maximum Protruding Objects
308.2 Forward Reach
308.3 Side Reach
309.4 Operation
902.3 Work Surface
Compliant when properly installed.
17-3/16"
(436 mm)
1
C
D
E
For Use With Toggle Anchors:
3/4" Flat Washers
Door / wall plate to be
mounted on outside of
18"
(457 mm)
B
Quantity
4
4
2
4
2
1
www.worlddryer.com
restroom door.
Publicidad
Tabla de contenido
