G. Paniz MPS 250 Manual De Instrucciones página 12

MPS 250 / 350 / 500 Super Bread Molders
HOW TO REPLACE THE FELT
6.1 - Remove motor lateral and front protections.
6.2 - Remove bolts "A".
6.3 - Unfasten the spring that is af fixed to the end of axle "B".
6.4 - Remove bolts "C", and then proceed as mentioned below .
A
A
C
C
B
How to perform replacement of the felt
6.5 - Remove cylinder 1 as indicated in the drawing below
6.6 - Insert a screwdriver (item 2) into the hole of the axle 3 and 4 in order to remove bolt
"E", and after that remove axles 3 and 4.
6.7 - To remove item 5 (conveyor) remove bearing from axle 6 and remove item 5 through
slot on the side.
6.8 - To remove item 7 (conveyor) remove bearing 8 by withdrawing item 7 through the
hole of the bearing that was removed, and then repeat this same step to remove lower
conveyor.
A
D
E
C
D B
10
CODE PARTS DESCRIPTION
01 - 05903 - RH LATERAL
02 - 05904 - LH LATERAL
03 - 06813 - OPENING BELT PROTECTION
04 - 05906 - LATERAL CLOSING
05 - 05906 - LATERAL CLOSING
06 - 06805 - MOTOR CLOSING
07 - 06807 - SAFETY PROTECTION
08 - 05901 - RH SUPPORT
09 - 05902 - LH SUPPORT
A
10 - 06838 - MOTOR SUPPORT
11 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
12 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
13 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
14 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
15 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
16 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
17 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
18 - 06818 - UPPER CYLINDER ASSEMBLY
19 - 06819 - FEEDING SHAFT
20 - 06817 - HAULING CYLINDER ASSEMBLY
21 - 05957 - SHAFT SECURITY PROTECTION
22 - 06808 - MPS STRETCHED ASSEMBLY CLOTH TOP
23 - 06809 - MPS STRETCHED ASSEMBLY CLOTH LOWER
24 - 06816 - ROCKER ARM SHAFT
25 - 06815 - LOWER CYLINDER ASSEMBLY
26 - 04822 - LATERAL FIXING ROD
27 - 05910 - ROLLER BEARING 32
28 - 05912 - ROLLER BEARING 35
29 - 05911 - LARGER BEARING
30 - 01181 - NYLON GEAR Z 11
31 - 05943 - GEAR ASSEMBLY Z21
32 - 05930 - GEAR ASSEMBLY Z 27
33 - 01181 - NYLON GEAR Z11
34 - 05933 - GEAR ASSEMBLY Z30
35 - 05950 - PULLEY FIXING ASSEMBLY
36 - 04308 - NYLON PULLEY CL390 / CFA300
37 - 70322 - CHAIN 1/2 X 1/8
38 - 00590 - ROLLER BEARING 6003ZZ
39 - 00022 - ROLLER BEARING 6002 ZZ
40 - 05926 - BEARING SHAFT ASSEMBLY
UTILITY REF.: MPS 250
CODE PARTS DESCRIPTION
41 - 05909 - RH BEARING
42 - 05908 - LH BEARING
43 - 05928 - RH ROCKER ARM FIXING SUPPORT
44 - 05929 - LH ROCKER ARM FIXING SUPPORT
45 - 05936 - RH OPENING SHAFT
46 - 05935 - LH OPENING SHAFT
47 - 05956 - HANDLE WITH HOUSING 3/8 X 70
48 - 02693 - TUBE FELT ASSEMBLY MP 25
49 - 00679 - MONOPHASE MOTOR 1/4 IV PE48 60 Hz
50 - 05951 - MOTOR PULLEY Z1
51 - 03510 - BELT Z-875
52 - 03914 - ON/OFF SWITCH 29123M4FT1EE3G15
53 - 02499 - BIVOLT SWITCH KEY
54 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
55 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
56 - ITEM IS NOT PROVIDED W/THIS EQUIPMENT
57 - 00372 - SCRAPER SPRING CL 300
58 - 00298 - CYLINDRICAL HEAD SCREW 05 X 50
59 - 00677 - PAN HEAD ALLEN SCREW M6 X 10
60 - 00677 - PAN HEAD PHILIPS SCREW M6 X 10
61 - 02595 - HEXAGONAL SCREW MA 12 X 40
62 - 00678 - ALLEN SCREW M6 X 25
63 - 00289 - HEXAGONAL SCREW MA 12 X 40
64 - 00677 - PAN HEAD ALLEN SCREW M6 X 10
65 - 05947 - CHAIN SPACER ASSEMBLY
66 - 00993 - SQUARE KEY 06 X 06 X 12
67 - 01804 - FLAT WASHER 23,5 F 6,5
68 - 00328 - FLAT WASHER 5/16
69 - 00970 - SPRING RING I 32
70 - 00968 - SPRING RING E 15
71 - 02236 - SPRING RING E 17
72 - 00749 - HEADLESS ALLEN SCREW 08 X 08
73 - 00761 - NUT M8
74 - 00743 - HEXAGONAL SCREW MA 06 X 20
75 - 70319 - CHAIN MPS 250/350/500 (340mm)
76 - 06845 - SUPERIOR CENTRAL AXLE DISTANCIADOR
77 - 70318 - CHAIN MPS 250/350/500 (440mm)
78 - 70320 - CHAIN MPS 250/350/500 (1140mm)
15