Publicidad
Idiomas disponibles
Idiomas disponibles
Boot Up Function
The BootUp program in "Utility" section of "Belkin U-Storage" manager window
will build up the device as a bootable disk. Before you run the program, please
make the following preparations,
1 This program can run under Windows 98 SE, XP, and ME.
(The program can't be supported in Windows 2000.)
2 Please turn off the anti-virus program during the procedure.
3 Make sure your Windows system was located in C Disk.
4 Make sure the "write-protect" switch is in "OFF" position.
5 This program only deals with one device at the same time.
6 Make sure your Belkin USB Flash Drive is in "Public
Area" if it is with "Security" function.
7 If you want to make your device as a bootable USB HDD, you can't make the
device as a "Security" one. This option is only supported in Windows 98 SE.
Warnings: If you performed the "Log In" action with your Belkin USB
When you are ready to process, follow the following procedures, the procedures
for Windows XP is different from Windows 98 and ME. This program cannot be
run in Windows 2000.
Windows 98 SE and Windows ME:
1 You can click the [Utility] button in the "Belkin U-Storage"
manager window to execute the Boot-up utility.
2 The following window will show up
Flash Drive and located in "Security Area" and run the
BootUp function, it will do the "Log Out" and erase all the
data in "Public Area".
23
1
2
3
4
5
6
7
8
9
10
11
Publicidad
