Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
.
•
The initial 15 minutes of use may produce a slight smell and smoke. This
is normal and harmless and it comes from the burning of the protective
substance applied to the heating elements during manufacturing. It is
recommended to run the unit for 15 minutes on the LOW setting to
eliminate the odor and smoke before using it for the first time.
.
1.
Before plugging in your new burner, check to see that the electric
circuit is not overloaded with other appliances. This unit should always
be operated on a separate 120Volt AC outlet.
2.
Be certain that your unit is resting on a
leveled flat, heat resistant countertop. Also,
avoid using pans that are unstable and that
can easily tip over.
3.
Place pan on heating element.
4.
Turn the temperature control knob to the
desired heat setting. The power indicator light of the switch will glow
indicating the heating element is turned on and heating will begin
immediately.
Note: THE METAL SURFACE WILL BECOME
VERY HOT, SO PLEASE DO NOT TOUCH
WHILE IN USE.
5.
When cooking is complete, turn temperature
control knob back to the "OFF" position.
6.
If the burner is not to be in use for a long
period of time, it is HIGHLY recommended to
unplug the unit from the outlet. This prevents
any accidental burns or injury.
....
•
Before cleaning, make sure the unit is off,
unplugged from the outlet, and that it has cooled
down completely, to avoid personal injury.
•
Wipe off the base and heating element with a
damp cloth. DO NOT IMMERSE THE BASE IN WATER
OR ANY OTHER LIQUID.
•
Any other servicing not recommended by the
manufacturer may cause hazards and should be
performed by an authorized
representative.
BEFORE FIRST USE (CONT.)
HOW TO USE
CARE AND MAINTENANCE
3
Publicidad
Tabla de contenido
