ION iGP03 Manual Del Propietario De Inicio Rápido página 4

Amplifier Features
2 3 4 5
1. Power Button: Turns on and off the amplifier power
2. Input Jack: Connect electric guitar cable to this jack, and the other end in the Output Jack on the
electric guitar.
3. Drive/Gain Control Knob: With the Drive Button pushed on, this knob adjusts the amount of audio
distortion. With the Drive Button off, it adjusts the pre-Master Volume audio level.
4. Drive Button: Adds distortion to the audio output when pushed on.
5. Master Volume: Adjusts the audio volume level.
6. High Adjustment Knob: Adjusts the high-frequency level.
7. Mid Adjustment Knob: Adjusts the mid-frequency level.
8. Low Adjustment Knob: Adjust the low-frequency level.
9. Output Jack: Outputs the master audio to alternate audio output source, such as headphones, mixers,
powered monitors, etc.
10. Power LED Indicator: This red LED lights up when the power is switched on.
Whammy Bar Installation:
1. Place the threaded end of the whammy bar into the threaded hole and screw in clockwise DO NOT
SCREW IN TIGHT, screw in until the handle is snug and then turn it back one revolution
counterclockwise.
2. To operate the Whammy Bar, gently move the bar towards and away from the body of the guitar. You
will hear a bending of the notes being played.
6 7
Whammy Bar Assembly
8 9 10 1