Precautionary Measures - VOCO V-Posil Instrucciones De Uso

V-Posil Light Fast and V-Posil X-Light Fast are to be used
as syringeable impression materials for:
• Two-step putty-wash impression technique
• One-step putty-wash impression technique
• Two-step impression technique using a foil (plastic putty
spacer)
• One-step impression technique (simultaneous tech-
nique) using dual viscosities
• Reline impressions
• Fabricating full or partial dentures
Warnings:
Do not use V-Posil impression materials as a temporary
reliner.
Do not use V-Posil impression materials with condensa-
tion-curing silicones, polyether, Vinylsiloxanether
sulfide materials.
V-Posil Putty Fast and V-Posil Heavy Soft Fast impres-
sion materials are not suitable for detailed impressions
when used alone.

Precautionary measures:

Do not use after expiration date.
Do not leave any residual impression material in the sulcus
or oral cavity.
Do not swallow impression material! If swallowed: consult
a medical doctor if problems arise or persist.
Avoid contact with eyes. If accidental contact with the
eyes occurs, rinse immediately and thoroughly with an eye
wash or water.
4
Consult a medical doctor if problems arise or persist.
These products do not normally cause allergic reactions.
However, for sensitive persons, an allergic reaction to the
products cannot be ruled out.
Use of products containing active sulfur, aluminium chlo-
ride or nitrogen compounds (retraction cords containing
ferric sulfate, polysulfide impression materials, etc.) in
conjunction with this product will interfere with the set-
ting reaction of the vinyl polysiloxane material. Use of
the materials requires the area to be rinsed thoroughly to
remove all residue, before an impression is taken. Do not
use latex gloves.
Do not interchange the Base and Catalyst lids or scoops
for hand-mixed jar putty.
In order to ensure an optimal adhesion of the two materi-
als during the two-step putty-wash impression technique,
or poly-
®
both impression steps must take place one immediate-
ly after the other.
When taking impressions of areas with severe undercuts
and wide interdental spaces, use standard block-out tech-
niques.
When using a custom impression tray, ensure that suf-
ficient space remains between the side of the tray and
the teeth/jaw.
Do not allow the material to enter the sewer or water sys-
tem to avoid environmental contamination.
Avoid contact with clothing, since the material cannot be
removed by dry cleaning.