Tabla de contenido
Publicidad
6. Eco Button:
When the unit is in ECO mode, the
light will turn on. In ECO mode, the unit will
turn off once the room is cooled to the user-set
temperature.
The unit will turn back on when the room
temperature rises above the user-set temperature.
Before the compressor starts,
run for a while, then it will stop for a while, and will
repeat to provide a much more comfortable feeling
and save energy.
Press the SLEEP button, all of the
7. Sleep Button:
display lights will turn off after a while, but the
Sleep light is always on. In SLEEP mode, the air
conditioner will automatically adjust the
temperature and fan speed to make the room
more comfortable during the night. The set
temperature will automatically raise every 30-60
minutes, and at most change six times until the
set temperature is 81 or 82 .
8. Fan Speed Button:
to choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL mode and
choose Hi, Med, Lo in FAN mode.
9.
Filter Button:
When the Filter Check light is off,
it is not necessary to press the Filter Check button.
When the Filter Check light is on, you can turn off
the light by pressing the Filter Check button. After
the fan motor works for 500 total hours, the Filter
Check light will turn on to remind the user to clean
the filter.
the fan motor will
Press the FAN SPEED button
10.
Directional Louvers:
use the
horizontal wheel to control the horizontal
direction,
and use the air deflectors to
vertical direction.
air deflector
10
To direct the airflow,
horizontal wheel
air deflector
control the
Publicidad
Tabla de contenido
