Chauvet DJ GEYSER P7 Guía De Referencia Rápida página 5

Control Panel Description
BUTTON FUNCTION
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
Enables the currently displayed menu or sets the currently selected value into the selected
<ENTER>
function
Menu Map
MAIN LEVEL
Addr
CH-1–4
Wireless Remote Control
To trigger fog output and activate the color program using the wireless remote control, do the following:
1. Plug the wireless receiver into the Controller In port on the side of the Geyser P7.
2. Program the color choice for each button on the remote (<1>–<4>), using the CH-1–4 menu options on the
Geyser P7.
3. On the wireless transmitter, press the button assigned to the desired color program (<1>–<4>). The Geyser P7
emits fog and outputs color for as long as the button is held down.
Geyser P7 QRG Rev. 2
QUICK REFERENCE GUIDE
PROGRAMMING LEVELS
1–512
oFF
Co 1
Co 2
Co 3
Co 4
Co 5
Co 6
Co 7
Co 8
Co 9
Co10
Co11
Co12
Co13
Co14
Co15
Co16
Co17
Co18
Co19
Co20
rand
DESCRIPTION
Sets the DMX starting address
No color output
Red
Green
Blue
Amber
Ultraviolet
Hot pink
Magenta
Yellow
Cyan
White
Zone 1 green, zone 2 red
Zone 1 blue, zone 2 red
Zone 1 red, zone 2 green
Zone 1 blue, zone 2 green
Zone 1 red, zone 2 blue
Zone 1 green, zone 2 blue
Zone 1 amber, zone 2 magenta
Zone 1 blue, zone 2 magenta
Zone 1 magenta, zone 2 amber
Zone 1 hot pink, zone 2 blue
Random color output
EN
4