Play Music - Lenco BTX-750 Manual Del Usuario

Tips: When a Micro SD card is inserted in the player, when you turn ON the device,
it will automatically start in Micro SD card mode, you will hear "Card Mode" and it
will, play songs from the micro SD card. Press "
to Bluetooth mode if you need.
Automatic Re-connection
1. Each time you turn the device on, the Bluetooth headset will automatically
connect to the last connected Bluetooth mobile device.
2. If the last paired device is not found within a few seconds, it will be
automatically enter in the Bluetooth new device searching mode.
3. Now you can prepare your new mobile device for pairing.
Disconnect from the pairing device
In Bluetooth connection mode, you can switch the device to Bluetooth search
mode at any time to pair with a new mobile device:
1. Long press the "
headphones, and you will hear a prompt tone "dingdong", the device enter in
searching mode, the blue Bluetooth indicator (1) and Red charging indicator
(2) will flash alternately.
2. You can now handle new mobile device pairings.
E. PLAY MUSIC
When the Bluetooth connection is successful, open the music play program on the
phone.
Or paying music by memory card
Music play/pause
1. When playing music, short press "
music.
2. Short press "
Volume up/down
1. Long press "+ Volume UP (7)" button to increase the volume rapidly.
2. Press "+ Volume UP (7)" button repeatedly to increase the volume step by step.
3. Long press "- Volume Down (8)" button to decrease the volume rapidly.
4. Press "- Volume Down (8)" button repeatedly to decrease the volume step by
step.
Tips: You will hear audible alert when the min. and max. volume level has been
Switch button(5)" 3 seconds on the Bluetooth
power button 4" again to resume playing music.
Switch button (05)" to switch
power button 4" to pause the playing
9