Palmgren 25404A Manual De Operación Y Lista De Partes página 3

Palmgren Operating Manual & Parts List
OPERATION
Refer to Figure 2.
• Mount vise to work surface in desired
location. Secure vise using mounting
flanges provided on swivel base (Ref.
No. 1). Be sure to bolt or clamp vise to
work surface using both swivel base
flanges.
• Rotate vise to desired position. A scale
and indicator are provided for refer-
ence. Tighten hex nuts (Ref. No. 15) to
secure body to swivel base.
• Open jaws of vise and place work piece
between jaws in desired position.
Secure workpiece between jaws by
rotating handle. Be sure workpiece is
held securely in vise before starting
machining operation.
• Swivel base can be removed to allow
body to be mounted directly to work
surface or table. Be sure to bolt or
clamp body to work surface or table in
at least two mounting locations.
MAINTENANCE
Particles of metal or wood can damage
machined surfaces, causing difficult or
inaccurate operation.
• The vise is shipped with a protective
coating. This coating should be
removed before operation. Use pene-
trating oil to remove protective coating.
• Keep machined surfaces and all mov-
ing parts clean and free of dirt, chips
and foreign materials.
• Keep machined surfaces and lead-
screws lubricated with medium weight
machine oil.
3
25404A & 26603A