23.10.
Starting the set-up wizard
Select EINRICHTUNGSASSISTENT to start the set-up wizard as described in the
section on using the device for the first time.
23.11.
Viewing software information
The software version and radio identification number of the device are shown un-
der INFO.
23.12.
Data protection
A data protection notice is displayed under DATENSCHUTZBESTIMMUNGEN.
23.13.
Confi guring the display lighting
You can configure the display lighting under DISPLAYBELEUCHTUNG:
– Dim the display in standby mode or operating mode after a pre-determined
time
– Display brightness
Setting the dim time during operation
Select ZEITÜBERSCHREITUNG and press SELECT to confirm. Select EIN,
10, 20, 30, 45, 60, 90, 120 or 180 seconds and press SELECT to con-
firm.
Display brightness during operation
Select IN BETRIEB and press SELECT to confirm. Set your preferred brightness,
HELL, MITTEL, DUNKEL, and press SELECT to confirm.
Display brightness in standby mode
Select DIM-LEVEL and press SELECT to confirm. Set your preferred brightness,
HELL, MITTEL, DUNKEL, and press SELECT to confirm.
314