Bluetooth Connection - Albrecht Audio DR 72 Manual Del Usaurio

14. Bluetooth Connection:

1. Press the "ON/OFF" button repeatedly until you are in the
"Bluetooth" mode.
2. In "Bluetooth" mode, press and hold "M/S" button to activate the
pairing mode, the message "Pairing" will be shown with a flashing
Bluetooth icon.
3. On your phone, turn on Bluetooth and search for Bluetooth
devices.
4. Select "DR 72" in the list and once connection is established, the
Bluetooth screen will display "Connected" and a Bluetooth icon
will be shown at the right top corner of the display.
5. In "Paring" mode, if you want to stop searching for any new
phone, you can always press "PRESET" button to stop searching
and return to last connected phone.
Remark: during the process of re-connecting to last connected phone,
it may take several seconds to one minute for reconnect depending on
model of phone. In the reconnecting process, the Bluetooth icon will be
flashing and the LCD will show "Not Connected".
6. You can disconnect an existing connected phone by pressing and
hold "M/S" button to force the DR 72 into pairing mode.
Remark: Once your phone is paired to the DR 72, the connection
between both devices will be automatically re-established each time
the DR 72 is powered on. DR 72 automatically connects itself to the
last used phone. If you want to connect DR 72 to another phone you
already paired but not the last one, you have to first disconnect the DR
72 in the current phone's Bluetooth setting. Then press and hold the
"M/S" button to enter pairing mode again.
English 21