Guide To Features - Tivoli Audio ART ConX Manual Del Usario

(On/Off Button): Press to turn on the unit. Hold to turn off.
SETUP: Press to enable your speaker to be connected to your home network.
PARTY MODE: Hold to send the music from this ConX to all other connected ConX and ART speakers.
More information can be found in the "Party Mode" section of this manual.
ADD/DROP: If the ConX is connected to a Group, holding this button removes it from the Group. If the
speaker is not connected to a Group, pressing this button connects it to the next available Group.
More information can be found in the "Add/Drop" section of this manual.
Status LED: Red: Standby
Blue: OPTICAL IN is active
Green: LINE OUT is active
Purple: LINE IN is active
POWER: Plug in your Tivoli power adapter to power your ConX. Use only the power supply provided
with this product. If the power supply becomes damaged or misplaced, use only a like replacement.
Any DC adapter used must be rated at 5VDC 1000mA. Replacement adapters can be purchased
from Tivoliaudio.com.
LINE IN: Use this input if you are using the ConX as a "master" to transmit an analog source (such as
the headphone output of a Model One) to other ART by Tivoli Audio products. The source should be
plugged into this input via a 3.5mm stereo cable.
LINE OUT: Use this output if the ConX is streaming a music service from itself or another ART by Tivoli
Audio speaker.
OPTICAL IN: Use this input if you are using the ConX as a "master" to transmit an optical source (such
as the optical output of a DAC) to other ART by Tivoli Audio products. The source should be plugged
into this input via an optical audio cable.
__________________________________________________________________________________________________

Guide to Features

English - 5