Package Contents; Installation; Intended Use; Symbols And Conventions - VWR 1814 Manual De Instrucciones

Package Contents

Centrifuge
Power cord
Rotor and wrench
Operation manual
Purchase registration card

Installation

1. Remove unit from packaging; verify rotor is clear and all package contents are
included.
2. Locate the centrifuge at least 300mm from the all edges of the lab bench.
3. Connect the centrifuge to the power cord first, then plug the power cord into the wall
AC outlet.
4. A soft beep can be heard as the microcentrifuge powers up. Factory default settings
will be displayed on the front panel. NOTE: If the lid latch does not release after power
up, press the RED stop button.

Intended use

This product is intended for indoor use only. Applications include microfiltration, mini or quick
spin columns, small volume pelleting of cells in liquid culture, quick spin downs, and low speed
sedimentation
.

Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.
CAUTION This symbol indicates a potential risk and alerts you to
proceed with caution

Product Specifications

- Maximum speed:
- Maximum capacity:
- Timer:
- Dimensions:
- Operating temperature:
- Operating humidity:
- The weight:
Electrical
- :
Instruction for Use
This microcentrifuge has been carefully designed and constructed for easy operation and
proven durability. Digital displays, quiet operation, simple controls, autoclavable rotors and
rotor covers are a few of this microcentrifuge's features
1
1
1
1
1
1814: 1816
13,000 rpm / 14,000 xg
14,000rpm/16,000xg
18 x 1.5/2.0 ml
99 minutes
26.7 x 23.8 x 17.8 cm
4º to 40ºC
0% to 95% humidity
5.0 kg (11 pounds)
120V, 100V, 230V:50/60 Hz
Max 185W
1.5A, 0.8A (230V only)
2.5AT, 1.25AT (230V only)
2416
13,300 rpm / 16,000 xg
24 x 1.5/2.0 ml
99 minutes
26.7 x 23.8 x 17.8 cm
4º to 40ºC
0% to 95% humidity
5.3 kg (11.75 pounds)
120V, 100V, 230V:50/60 Hz
Max 185W
1.5A, 0.8A (230V only)
2.5AT, 1.25AT (230V only)