Panasonic EW1611 Instrucciones De Funcionamiento página 12

4. Select the water pressure level.
1 Press the power switch.
(The water pressure level
LED indicator lights on.)
• The product will automatically
stop operation after about
10 minutes.
2 With the nozzle facing the basin,
set the Stop/Jet switch to "
(Jet mode) to jet water.
3 Press "+" or "-" on the water
pressure regulator switch until
the desired flow intensity is
reached.
• Keep pressing "+" or "-" will
continuously change the water
pressure.
4 Set the Stop/Jet switch to " "
(Stop) to stop jetting temporarily.
• Do not leave the product in
the " " (Stop) state for more
than 1 minute. (May cause
malfunction.)
12
PB014248 - EW1611W503 _(01EN)_01-20-17.indd 12
5. Place the nozzle in your mouth, close your
Stop/Jet switch
"
Level 10
Level 2
6. After use, set the Stop/Jet switch to
Level 1
mouth gently, and set the Stop/Jet switch to
" " (Jet mode).
If you want to pause jetting, set the Stop/Jet switch to
" " (Stop).
Raise your elbow
" " (Stop) and turn off the power
switch.
• The water pressure level LED indicator
flashes. (The indicator will be off after
1 minute.)
• The last selected water pressure level
will be remembered, from which the oral
irrigator will start next time.
Keep head over the basin
2017/1/20 14:59:25