STACK-ON QAS-1512 Instrucciones

QAS-1512
QAS-1545
Serial #:
Your Electronic Safe Combination:
IMPORTANT
Record your combination.
Record the serial number from the tag on the door front.
Keep keys and combination in a secure place away
from children.
DO NOT STORE YOUR KEYS OR COMBINATION
INSIDE THE SAFE.
Hardware Included:
(4) M6 x 20 mm (3/4" long) Screws
(4) Washers
Tools Required:
Drill
Flat Head Screwdriver
10 mm Wrench
3/16" (5 mm) drill bit for drilling into wood
®
Instructions
CONTROL FEATURES
1.
Key lock
2.
Combination buttons
3.
Reset button (inside safe)
4.
Battery Compartment (inside safe)
GETTING STARTED
When you rst receive your safe you will need to
open the door with the key in order to install the
ba eries. Ba eries are included and are located
inside the safe.
NOTE: is key has also been provided incase you
lose or forget your security code or the ba eries run
low. If you lose your key, you may purchase a
replacement key by referencing the serial number
located on the front of the door. See section
regarding replacement keys for further information.
To open the safe, insert key into lock and turn
clockwise until the door automatically opens.
NOTE: You must turn the key back to the locked
position before you are able to close and lock the
door.
1
18
40544-1507