Description; Introduction; Packing List; Optionales Zubehör - AKG PT40 PRO Modo De Empleo

PT 40_2008_Hex:Layout 1
Vielen Dank, dass Sie sich für ein Produkt aus dem Hause AKG entschieden haben. Bitte
lesen Sie die Bedienungsanleitung aufmerksam durch, bevor Sie das Gerät benützen,
und bewahren Sie die Bedienungsanleitung sorgfältig auf, damit Sie jederzeit nachschlagen
können. Wir wünschen Ihnen viel Spaß und Erfolg!
1 PT 40 PRO or PT 40 FLEXX bodypack transmitter
1 AA size battery
1 set of lettering labels
1 MKG L guitar cable
1 Manual Supplement sheet
• Check that the packaging contains all of the items listed for your system. Should any of
these items be missing, please contact your AKG dealer.
• For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
You can use the PT 40 PRO bodypack transmitter with both dynamic microphones and con-
denser microphones operating on a supply voltage of approx. 4 V. You may also connect an
electric guitar, electric bass, or remote keyboard.
The PT 40 PRO operates on a single fixed, quartz stabilized frequency in the 660 MHz to 865
MHz UHF carrier frequency range.
1 On/off switch: This slide switch provides
three positions indicated in the display
window:
ON: Power to the transmitter is on.
MUTE: The signal delivered by the mi-
crophone element is muted while power
and the RF carrier frequency remain on.
OFF: Power to the transmitter is off.
2 Status LED: Indicates the transmitter's
operating status.
LED lit green: Battery is OK.
LED lit red: From the moment the LED
changes to red, the battery capacity will
provide a maximum of two operating
hours. We recommend replacing the bat-
tery with a new one as soon as possible.
• If you use a rechargeable battery, the LED will change to red 15 minutes before the bat-
tery will be dead!
3 Audio input: 3-pin mini XLR connector with both mic and line level pins that automat-
ically match the connector pinout of the recommended AKG microphones or optional
MKG L guitar cable.
4 Antenna: Permanently connected, flexible antenna.
5 Belt clip for fixing the transmitter to your belt.
6 Battery compartment lid with integrated screwdriver.
PT 40 PRO/FLEXX
01/17/2008 09:52 Seite 17 (Schwarz/Black Auszug)

2 Description

2.1 Einleitung
2.2 Lieferumfang
2.3 Optionales
Zubehör
2.4 PT 40 PRO
Bodypack Transmitter

2.4.1 Controls

Fig. 1: Controls on PT 40
bodypack transmitter.
Note:
17